ARM46AK-PS7, 1.65 in. (42 mm) AR Series Closed Loop Planetary Gear Stepper Motor (Gear Ratio: 7.2:1) (DC Input)

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

αSTEP Stepper Motors Brushless DC Motors Servo Motors AC Gear Motors Linear Actuators Rotary Actuators Network Products Cooling Fans

Request Information

Web Price

$416.00

The AR Series stepper motor adopts our αSTEP technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires αSTEP AR Series (DC Input) Driver.

Driver sold separately
Designed for continuous operation
Lower heat generation
Low vibration
High response
No hunting
No gain tuning

*Connection Cables required (sold separately)

Compatible Motors (sold separately)

Unit of Measure

Lead Time¹
Product Line	- Oriental Motor®
Motor Type	- Closed Loop
Frame Size	- 1.65 in42 mm
Motor Length	- 3.78 in.96 mm
Driver Voltage Input Power	- DC
Speed-Torque Characteristics	- Loading zoom Speed - Torque Characteristics
Holding Torque	- 210 oz-in1.5 N·m
Shaft/Gear Type	- Planetary Gear
Gear Ratio (X:1)	- 7.2 :1
Backlash	- 15 arc min (0.25°)
Shaft	- Single
Electromagnetic Brake	- Not Equipped
Resolution (Resolution Setting: 1000 P/R)	- 0.05 °/Pulse
Permissible Speed Range (r/min)	- 0 ~ 416
Rotor Inertia	- 0.32 oz-in²58x10^-7 kg·m²
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL CE
CE Marking	- EMC Directives
Permissible Overhung Load	- 0 in. from Shaft End = 16.4 lb0.2 in. from Shaft End = 18.9 lb0.39 in. from Shaft End = 22 lb0.59 in. from Shaft End = 27 lb0 mm from Shaft End = 73 N5 mm from Shaft End = 84 N10 mm from Shaft End = 100 N15 mm from Shaft End = 123 N
Permissible Thrust Load	- 22 lb100 N

Insulation Class	- [Motor] Class B [130ºC (266ºF)]
Insulation Resistance	- 100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings
Dielectric Strength	- Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz
Ambient Temperature	- -10 ~ 50ºC (14 ~ 122ºF) (non-freezing) (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.)
Ambient Humidity	- 85% or less (Non-Condensing)
Operating Atmosphere	- No corrosive gases, dust, water or oil.
Degree of Protection	- IP65 (excluding the mounting surface and connector)
Stop Position Accuracy	- ±4 arc minutes (±0.067º)
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.

¹ Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

Product Line

Motor Type

Frame Size

Motor Length

Driver Voltage Input Power

Speed-Torque Characteristics

Holding Torque

Shaft/Gear Type

Gear Ratio (X:1)

Backlash

Shaft

Electromagnetic Brake

Resolution (Resolution Setting: 1000 P/R)

Permissible Speed Range (r/min)

Rotor Inertia

RoHS Compliant

Safety Standards

CE Marking

Permissible Overhung Load

Permissible Thrust Load

Insulation Class

Insulation Resistance

Dielectric Strength

Ambient Temperature

Ambient Humidity

Operating Atmosphere

Degree of Protection

Stop Position Accuracy

Shaft Runout

Concentricity

Perpendicularity

ABOUT ORIENTAL MOTOR

PRODUCT INFO

SUPPORT

NEWS

WEB