130 mm (5.12 in.) DGII-AZ Series Absolute Encoder Hollow Rotary Actuators (Horizontal Motor Mount

The DGII Series Horizontal Motor Mount uses a highly rigid hollow rotary table with an absolute encoder AZ series closed loop motor allowing for highly accurate positioning of larger inertia loads.

Easy Home Setting and Return-to-Home without need for sensors
Low vibration
High response
No hunting
No gain tuning
Motor and Driver Cables required*

Unit of Measure

Items	DGB130R18-AZACL Hollow Rotary Actuator (Horizontal Motor Mount) Web Price $2,644.00	DGB130R36-AZACL Hollow Rotary Actuator (Horizontal Motor Mount) Web Price $2,644.00	DGB130R18-AZACR Hollow Rotary Actuator (Horizontal Motor Mount) Web Price $2,644.00	DGB130R36-AZACR Hollow Rotary Actuator (Horizontal Motor Mount) Web Price $2,644.00	DGB130R18-AZMCL Hollow Rotary Actuator (Horizontal Motor Mount) Web Price $2,894.00
Frame Size	- 5.12 in
Power Supply	- AC Input
Shaft	- Single
Gear Ratio (X:1)	- 18 :1	- 36 :1	- 18 :1	- 36 :1	- 18 :1
Motor Location	- Horizontal Mount
Cable Direction	- Left	- Left	- Right	- Right	- Left
Electromagnetic Brake	- Not Equipped	- Not Equipped	- Not Equipped	- Not Equipped	- Equipped
Output Table Supporting Bearing	- Cross-Roller Bearing
Permissible Torque	- 106 lb-in	- 210 lb-in	- 106 lb-in	- 210 lb-in	- 106 lb-in
Inertia	- 800 oz-in²	- 2800 oz-in²	- 800 oz-in²	- 2800 oz-in²	- 1080 oz-in²
Permissible Speed (r/min)	- 1200º/seconds (200 r/min)	- 600º/seconds (100 r/min)	- 1200º/seconds (200 r/min)	- 600º/seconds (100 r/min)	- 1200º/seconds (200 r/min)
Max. Holding Torque	- 106 lb-in	- 191 lb-in	- 106 lb-in	- 191 lb-in	- 106 lb-in
Lost Motion	-
Angular Transmission Accuracy	- 6 arc minute (0.1º)
Permissible Thrust Load	-
Permissible Moment Load	- 440 lb-in
Runout of Output Table Surface	- 0.0006 in.
Runout of Output Table Inner (Outer) Diameter	- 0.0006 in.
Parallelism of Output Table	- 0.0012 in.
Degree of Protection	- Actuator: IP40 (IP20 for motor connector)