ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Product Line |
Oriental Motor® |
Frame Size |
1.65 in |
Motor Length |
3.98 in. |
Speed-Torque Characteristics |
 Speed - Torque Characteristics |
Holding Torque |
42 oz-in |
Type |
Absolute Sensor Type |
Shaft/Gear Type |
Round Shaft (No Gearhead) |
Feedback Device (Motor) |
Absolute Mechanical Sensor |
Shaft |
Single |
Electromagnetic Brake |
Equipped |
Power Supply |
Single-Phase/Three-Phase 200-240 VAC |
Current |
1.0 A [Three-Phase] 1.7 A [Single-Phase] |
Resolution (Resolution Setting: 1000 P/R) |
0.36 °/Pulse |
Rotor Inertia |
0.39 oz-in² |
Control Power Supply |
24 VDC ± 5%, 0.33 A 24 VDC ± 4%, 0.33 A if wiring distance between motor and driver is extended by 65.6 ft. (20 m) using accessory cable. |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
UL CE |
CE Marking |
Low Voltage Directives EMC Directives |
Power Removal Function |
Emergency Torque Off (ETO) Function |
Components |
AZM46MC [Motor] AZD-C [Driver] |
Degree of Protection |
[Motor] IP66 (excluding the mounting surface and connector) [Driver] IP20 |
Stop Position Accuracy |
±4 arc minutes (±0.067º) |
Shaft Runout |
0.05 mm (0.002 in.) T.I.R. |
Concentricity |
0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
0.075 mm (0.003 in.) T.I.R. |
Radial Load |
0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb |
Axial Load |
3.3 lb |
Maximum Input Pulse Frequency |
Line driver output by programmable controller: 1 MHz (When pulse duty is 50%) Open-collector output by programmable controller: 250 kHz (When pulse duty is 50%) Negative Logic Pulse Input (Initial Value) |
Control Command |
Pulse input |
Direct Input |
Input Points: 6 Points |
Direct Output |
Output Points: 6 Points |
