ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
Product Line |
Oriental Motor® |
Frame Size |
2.36 in |
Motor Length |
6.20 in. |
Driver Voltage Input Power |
DC |
Speed-Torque Characteristics |
 Speed - Torque Charcteristics |
Holding Torque |
5664.5 oz-in |
Holding Torque at Motor Standstill |
1133 oz-in |
Type |
Absolute Mechanical Encoder |
Shaft/Gear Type |
Planetary Gear |
Gear Ratio (X:1) |
40 :1 |
Backlash |
12 arc min (0.2°) |
Shaft |
Single |
Electromagnetic Brake |
Not Equipped |
Connection Type |
Cable |
Resolution (Resolution Setting: 1000 P/R) |
0.009 °/Pulse |
Permissible Speed Range (r/min) |
0 ~ 100 |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
CE |
CE Marking |
EMC Directives |
Insulation Class |
Class B [130ºC (266ºF)] |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Operating Atmosphere |
Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Degree of Protection |
Motor: IP66 (excluding the mounting surface and connector) Gearhead: IP54 |
Stop Position Accuracy |
±3 arc minutes (±0.05º) |
Permissible Overhung Load |
Static load, center of output shaft: 157.37 lb |
Permissible Axial Load |
179 lb |
