ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Frame Size |
1.65 in |
Motor Length |
1.81 in. |
Speed-Torque Characteristics |
 |
Holding Torque |
38 oz-in |
Type |
Standard |
Shaft/Gear Type |
Round Shaft with Flat (No Gearhead) |
Encoder |
Not Equipped |
Shaft |
Single |
Electromagnetic Brake |
Not Equipped |
Power Input |
AC |
Current |
0.35 A |
Basic Step Angle |
0.72º |
Rotor Inertia |
0.35 oz-in² |
Permissible Overhung Load |
0 in. from Shaft End = 7.8 lb0.2 in. from Shaft End = 9.9 lb0.39 in. from Shaft End = 13 lb0.59 in. from Shaft End = 19.1 lb |
Permissible Thrust Load |
0.83 lb |
RoHS Compliant |
Yes |
Safety Standards |
UL CE |
CE Marking |
Low Voltage Directives EMC Directives |
Insulation Resistance (Motor) |
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor windings |
Dielectric Strength (Motor) |
Sufficient to withstand the following for 1 minute: Case - Motor windings 1.5 kVAC 50 Hz or 60 Hz |
Degree of Protection |
IP20 |
Ambient Temperature Range |
+14 ~ +122ºF (-10 ~ +50ºC) (non-freezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Operating Atmosphere |
No corrosive gases, dust. Avoid contact with water or oil. |
Temperature Rise |
Temperature rise of the windings is 144ºF (80ºC) or less. Measured at rated current, at standstill, five phases energized measured (by resistance change method). |
Shaft Runout |
0.002 in (0.05 mm) T.I.R. |
Concentricity |
0.003 in. (0.075 mm) T.I.R. |
Perpendicularity |
0.003 in. (0.075 mm) T.I.R. |
Stop Position Accuracy |
±5 arc minutes (±0.084º) |
Radial Play |
0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) |
Axial Play |
0.003 in (0.075 mm) max. of 2.2 lb. (10 N) |
