Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
AZX Series servo motors are equipped with a battery-free absolute sensor. They are suitable for positioning applications with a large amount of travel, since they achieve high torque in the high speed range. This driver is EtherNet/IP-compatible. The host control device and driver can be connected with one EtherNet/IP communication cable, reducing wiring.
  • Built-in Protective Functions
  • Monitoring Functions
  • Single-Phase/Three-Phase 200-240 VAC
  • For use with AC Input AZX Series Motors




EtherNet/IP™ is amore

Driver (*required)

Unit of Measure

Specifications

Lead Time1

Driver Type

EtherNet/IP Compatible

Power Supply

Single-Phase/Three-Phase 200-240 VAC

Control Power Supply

24 VDC ±5%, 0.27 A (see manual for Electromagnetic Brake)

Interface - Control Input

6 points, Photocoupler

Interface - Pulse Output

2 points, Line driver

Interface - Control Output

6 points, Photocoupler/Open collector

Interface - Power Shut Down Signal Input

2 points, Photocoupler

Interface - Power Shut Down Monitor Output

1 point, Photocoupler/Open collector

Interface - Field Network

EtherNet/IP

Degree of Protection

IP10

Insulation Resistance (Driver)

When a 500 VDC megger is applied to the following locations, resistance is 100MΩ or higher.
Between the PE terminal and main power supply terminal
Between the encoder connector and main power supply terminal
Between the I/O signal terminal and main power supply terminal.

Dielectric Strength (Driver)

Sufficient to withstand the following for 1 minute
Between the protective earth terminal and main power supply 1.5 kVAC 50/60 HZ
Between the encoder connector and the mian power supply terminal 1.8 kVAC 50/60 Hz
Between the I/O signal terminal and main power supply terminal 1.8 kVAC 50/60 Hz

Ambient Temperature Range

0ºC ~ +55ºC (+32ºF ~ +131ºF) (nonfreezing) for AZXM940

Ambient Humidity

85% max. (noncondensing)

Operating Atmosphere

No corrosive gases or dust. The product should not be exposed to water,oil or other liquids.

Communications

Communication Protocol

EtherNet/IP Comminucation (Conforms with CT18)

Vendor ID

187: Oriental Motor Company

Device Type

43: Generic Device

Transmission Rate

10/100 Mbps (Autonegotiation)

Communication Method

Full duplex/Half duplex (Autonegotiation)

Cable Specifications

Shielded twisted-pair (STP cable)
Stroke/Cross, Category 5e or higher

Number of Occupied Bytes - Output (Scanner > Driver)

40 bytes

Number of Occupied Bytes - Input (Driver > Scanner)

56 bytes

Implicit Communication - Number of Connections

2

Implicit Communication - Connection Type

Exclusive Owner, Input Only

Implicit Communication - Communication Cycle (RPI)

1 to 3200 ms

Implicit Communication - Connection Type (Scanner > Driver)

Point-to-Point

Implicit Communication - Connection Type (Driver > Scanner)

Point-to-Point, Multicast

Implicit Communication - Data Trigger

Cyclic

IP Address Setting Method

IP address setting switch, Parameter, DHCP

Network Topologies

Star, Linear, Ring (Device Level Ring)

Dimensions


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.