ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Product Line |
Oriental Motor® |
Motor Type |
Induction |
Frame Size |
3.54 in |
Output Power |
100 W (1/8 HP) |
Voltage (VAC) |
Three-Phase 220/230 VAC |
Frequency (Hz) |
60 50 |
Current |
0.46 A [220 VAC, 60 Hz] 0.45 A [230 VAC, 60 Hz] 0.49 A [50 Hz] |
Type |
Lead Wire |
Electromagnetic Brake |
Not Equipped |
Shaft/Gear Type |
Right-Angle Hollow Shaft Gearhead |
Gear Ratio (X:1) |
20 :1 |
Output Shaft Diameter |
15 mm |
Rated Torque |
72 lb-in [60 Hz] 73 lb-in [50 Hz] |
Starting Torque |
73 |
Rated Speed (rpm) |
75 [50 Hz] 90 [60 Hz] |
Permissible Load Inertia |
Instantaneous Stop = 1460 oz-in²4400 oz-in² |
Permissible Overhung Load |
0.39 in. from Shaft End = 155 lb0.79 in. from Shaft End = 136 lb |
Permissible Thrust Load |
41 lb |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
UL CCC CE |
CE Marking |
Low Voltage Directives |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength |
Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
Temperature Rise |
A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after |
Thermal Class |
130 (B) |
Ambient Temperature Range |
32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
85% or less (noncondensing) |
Degree of Protection |
IP20 |
