ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Frame Size |
1.1 in |
Motor Length |
2.03 in. |
Basic Step Angle |
0.72º |
Speed-Torque Characteristics |
 |
Max. Holding Torque |
12.9 oz-in |
Holding Torque at Motor Standstill |
6.3 oz-in |
Speed Setting Range |
0.02 to 600 r/min |
Speed Accuracy |
±0.8% |
Power Supply |
24 VDC |
Current per Phase |
1.2 A/phase |
Shaft/Gear Type |
Round Shaft with Flat (No Gearhead) |
Gear Type |
No Gearhead |
Motor Connection Type |
Connector |
Shaft |
Double |
Output Shaft |
Metric |
Output Shaft Diameter |
5 mm |
Step Angle |
0.72 ° |
Connection Type |
New Pentagon (Bipolar) |
Lead Wires |
5 |
Rotor Inertia |
0.098 oz-in² |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
CE |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 0.5 kVAC 50/60 Hz |
Temperature Rise |
Winding temperature rise 144ºF (80ºC) max. |
Insulation Class |
0 |
Ambient Temperature Range |
14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Shaft Runout |
0.05 mm (0.002 in.) T.I.R. |
Concentricity |
0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
0.075 mm (0.003 in.) T.I.R. |
Radial Play |
0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
0.075 mm (0.003 in.) maximum of 2.5 N (0.59 lb.) |
Radial Load |
0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb |
Axial Load |
1.1 lb |
