ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Motor Type |
Brushless DC Motor |
Motor Frame Size |
3.54 in. |
Output Power |
100 W (1/8 HP) |
Power Supply |
24 - 48 VDC |
Rated Input Current |
2.6 A (48 V) ~ 5.1 A (24 V) |
Maximum Input Current |
10 A |
Shaft/Gear Type |
Parallel Shaft Gearhead |
Gear Ratio (X:1) |
20 :1 |
Output Shaft Diameter |
18 mm |
Rated Torque |
50 lb-in |
Electromagnetic Brake |
Equipped |
Brake Type |
Power off activated type, automatically controlled by driver |
Cable Direction |
Opposite Output Shaft Side |
Cable Length (Included) |
1.64 ft. (0.5 m) |
Variable Speed Range (r/min) |
0.05 ~ 200 |
Resolution |
0.01º (36000 Pulses per rotation) |
Permissible Load Inertia |
50000 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 2200 oz-in² |
Permissible Overhung Load |
0.39 in. from Shaft End (3000 r/min) = 90 lb0.79 in. from Shaft End (3000 r/min) = 112 lb |
Permissible Thrust Load |
33 lb |
Power Input |
DC |
Components |
BLVD-KRD [Driver] GFV5G20 [Gearhead] BLMR5100KM-GFV-B [Motor] |
Safety Standards |
UL CE |
CE Marking |
EMC Directives |
Insulation Class |
[Motor] UL / CSA Standards: 105 (A), EN Standards: 120 (E) |
Insulation Resistance (Motor) |
100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
Insulation Resistance (Driver) |
100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat sink after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Motor) |
Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Driver) |
Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat ink for 1 minute after continuous operation under normal ambient temperature and humidity. |
Ambient Temperature Range |
0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
Ambient Humidity |
85% max. (noncondensing) |
Operating Atmosphere |
No corrosive gases or dust. This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
Degree of Protection |
[Motor] IP40 [Driver] IP20 |
Communication Protocol |
Modbus RTU Mode |
Electrical Characteristics |
EIA-485 Based. Use a shielded twisted pair cable and keep the total wiring distance including extension to 32.8 ft. (10 m) or less. |
Transmission/Reception Mode |
Select either 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, or 230400 bps (initial value) |
