ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Product Line |
Oriental Motor® |
Motor Type |
Electromagnetic Brake - Induction |
Frame Size |
4.09 in |
Output Power |
200 W (1/4 HP) |
Voltage (VAC) |
Three-Phase 200/220/230 VAC |
Frequency (Hz) |
60 50 |
Current |
0.95 A [220/230 VAC] 1.1 A [200 VAC] |
Shaft/Gear Type |
Parallel Shaft Gearhead |
Gear Ratio (X:1) |
30 :1 |
Output Shaft Diameter |
18 mm |
Electromagnetic Brake |
Equipped |
Rated Torque |
280 lb-in [60 Hz] 330 lb-in [50 Hz] |
Rated Speed (rpm) |
50 [50 Hz] 60 [60 Hz] |
Permissible Load Inertia |
9810 oz-in2 |
Permissible Load Inertia |
9810 oz-in² |
Permissible Overhung Load |
0.39 in. from Shaft End = 123 lb0.79 in. from Shaft End = 180 lb |
Permissible Thrust Load |
45 lb |
RoHS Compliant |
Yes |
Safety Standards |
UL CSA EN CE |
CE Marking |
Low Voltage Directives |
Insulation Resistance |
100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Insulation Class |
Class B (266ºF [130ºC]) |
Dielectric Strength |
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise |
Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
Overheat Protection |
Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range |
14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Degree of Protection |
IP54 |
