ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Product Line |
Oriental Motor® |
Motor Type |
AC Motor |
Frame Size |
2.36 in |
Output Power |
6 W (1/125 HP) |
Power Supply |
Single-Phase 110/115 VAC |
Frequency (Hz) |
60 |
Current |
0.28 A |
Shaft/Gear Type |
Parallel Shaft Gearhead |
Gear Ratio (X:1) |
6 :1 |
Output Shaft Diameter |
5/16 in. |
Permissible Torque |
2.1 lb-in |
Variable Speed Range (r/min) |
15 ~ 266 |
Permissible Load Inertia |
12.24 oz-in² |
Permissible Overhung Load |
0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb |
Permissible Thrust Load |
6.7 lb |
Max. Extension Length (m) |
4.75 |
Components |
USP206-1U2 (Control Unit) USM206-401W2 (Motor) 2GN6SA (Gearhead) |
RoHS Compliant |
Yes |
Safety Standards |
UL CSA CCC EN CE |
CE Marking |
Low Voltage Directives EMC Directive |
Insulation Resistance |
[Motor] 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. [Control Unit] 100 MΩ or more when 500 VDC megger is applied between all the pins and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength |
[Control Unit] Sufficient to withstand 2.3 kV at 60 Hz applied between all the pins and the case for 1 minute after rated operation under normal ambient temperature and humidity. [Motor] Sufficient to withstand 1.5 kV at 50 Hz and 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
Insulation Class |
[Motor] Class B (266ºF [ 130ºC]) |
Ambient Temperature Range |
[Motor] 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) [Control Unit] 32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Degree of Protection |
[Motor] IP20 [Control Unit] IP10 |
