
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
| Product Line | - Oriental Motor® | 
| Motor Type | - Reversible | 
| Frame Size | - 3.54 in | 
| Output Power | - 90 W (1/8 HP) | 
| Voltage (VAC) | - Single-Phase 110/115 VAC | 
| Frequency (Hz) | - 60 | 
| Current | - 1.65 A [110 VAC] 1.66 A [115 VAC] | 
| Type | - Lead Wire | 
| Electromagnetic Brake | - Not Equipped | 
| Shaft/Gear Type | - Parallel Shaft Gearhead | 
| Gear Ratio (X:1) | - 6 :1 | 
| Output Shaft Diameter | - 18 mm | 
| Rated Torque | - 26 lb-in | 
| Rated Speed (rpm) | - 300 | 
| Permissible Load Inertia | - 360 oz-in²When performing instantaneous stop = 220 oz-in² | 
| Permissible Overhung Load | - 0.39 in. from Output Shaft End = 90 lb0.79 in. from Output Shaft End = 112 lb | 
| Permissible Thrust Load | - 33 lb | 
| Components | - 5RK90GVR-UA [Motor] 5GVR6B [Gearhead] | 
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | 
| Safety Standards | - UL CE | 
| CE Marking | - Low Voltage Directives | 
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. | 
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. | 
| Temperature Rise | - Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity. | 
| Insulation Class | - 130 (B) | 
| Overheat Protection | - Built-in thermal protector (automatic return type). Open: 266 ± 9ºF (130 ± 5ºC) Close: 185 ± 36ºF (85 ± 20ºC) | 
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) | 
| Ambient Humidity | - 85% or less (noncondensing) | 
| Degree of Protection | - IP20 | 
