ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Basic Step Angle |
1.8º |
Motor Connection Type |
Flat Connector |
Connection Type |
Bipolar |
Type |
Geared |
Frame Size |
2.22 in |
Motor Length |
5.89 in. |
Holding Torque |
1600 oz-in |
Current per Phase |
1.4 A/phase |
Voltage (VDC) |
6.6 |
Resistance (Ω/phase) |
4.7 |
Inductance (mH/phase) |
18 |
Shaft/Gear Type |
Planetary Gear |
Gear Ratio (X:1) |
5 :1 |
Output Shaft |
Metric |
Output Shaft Diameter |
14 mm |
Backlash |
10 arc min |
Shaft |
Single |
Step Angle |
0.36 ° |
Lead Wires |
4 |
Rotor Inertia |
2.7 oz-in² |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Insulation Class |
130 (B) |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1.0 kVAC 50/60 Hz |
Temperature Rise |
Winding temperature rise 144ºF (80ºC) max. |
Ambient Temperature Range |
14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
85% or less (Non-Condensing) |
Stop Position Accuracy |
±3 arc minutes (±0.05º) |
Radial Load |
Center of shaft = 157.5 lb |
Axial Load |
180 lb |
