Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
Capacitor-run, single-phase motors. The outward appearance is the same as that of induction motors, however, these motors are suited for applications where the motor must frequently switch direction.
  • 6 W (1/125 HP)
  • 2.36 in. (60 mm) Frame Size
  • Rated Torque
    • Round Shaft = 6.9 oz-in (49 mN·m)
    • Parallel Shaft Gear = 1.06 ~ 26 lb-in (0.12 ~ 3 N·m)
  • Lead Wire Type
ik-gn-rohs-img
Unit of Measure
Items ik-rk-round-shaft.jpg
2RK6A-AW2U
6 W (1/125 HP) Reversible Motor (Single-Phase 110/115 VAC)
Web Price $96.00
 ik-rk-round-shaft.jpg
2RK6A-CW2E
6 W (1/125 HP) Reversible Motor (Single-Phase 220/230 VAC)
Web Price $98.00
 ik_m_round_shaft.jpg
2RK6A-AW2MU
6 W (1/125 HP) Electromagnetic Brake Reversible Motor (Single-Phase 110/115 VAC)
Web Price $210.00
 ik_m_round_shaft.jpg
2RK6A-CW2ME
6 W (1/125 HP) Electromagnetic Brake Reversible Motor (Single-Phase 220/230 VAC)
Web Price $215.00
 ik-gn-rohs-img
2RK6GN-AW2U / 2GN3KA
6 W (1/125 HP) Reversible Gear Motor (3:1 Gear Ratio) (Single-Phase 110/115 VAC)
Web Price $173.00
Frame Size - 2.36 in
Output Power - 6 W (1/125 HP)
Voltage (VAC) - Single-Phase 110/115 VAC - Single-Phase 220/230 VAC - Single-Phase 110/115 VAC - Single-Phase 220/230 VAC - Single-Phase 110/115 VAC
Frequency (Hz) - 60 - 60 50 - 60 - 60 50 - 60
Current - 0.251 A [110 VAC] 0.256 A [115 VAC] - 0.113 A [220 VAC, 50 Hz] 0.117 A [220 VAC, 60 Hz / 230 VAC, 50 Hz] 0.120 A [230 VAC, 60 Hz] - 0.235 A [110 VAC] 0.242 A [115 VAC] - 0.107 A [220 VAC, 50 Hz] 0.109 A [220 VAC, 60 Hz] 0.112 A [230 VAC, 50 Hz] 0.113 A [230 VAC, 60 Hz] - 0.251 A [110 VAC] 0.256 A [115 VAC]
Shaft/Gear Type - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Round Shaft (No Gearhead) - Parallel Shaft Gearhead
Gear Ratio (X:1) - - - - - 3 :1
Output Shaft - Metric - Metric - Metric - Metric - Imperial
Output Shaft Diameter - 6 mm - 6 mm - 6 mm - 6 mm - 5/16 in.
Type - Lead Wire
Electromagnetic Brake - Not Equipped - Not Equipped - Equipped - Equipped - Not Equipped
Rated Torque - 0.394 lb-in   - 0.394 lb-in [60 Hz]  0.444 lb-in [50 Hz]   - 0.3625 lb-in   - 0.3625 lb-in [60 Hz]  0.43125 lb-in [50 Hz]   - 0.88 lb-in  
Rated Speed (rpm) - 1450 - 1200 [50 Hz] 1450 [60 Hz] - 1450 - 1200 [50 Hz] 1450 [60 Hz] - 600
Permissible Load Inertia - - - - - 3.06 oz-in²
Permissible Overhung Load - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb
Permissible Thrust Load - - - - - 6.7 lb
Permissible Thrust Load - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. -
RoHS Compliant - Yes
Safety Standards - UL CSA CCC EN CE