Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
New AZ Series motors, which can be connected directly to the compact driver without the use of connection cables. The AZ Series offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back-up or external sensors to buy. Requires AZD-KRD AlphaStep AZ Series Driver.
  • 1.10 in. (28 mm) Frame Size
  • Battery-Free, Mechanical Absolute Encoder
  • DC Input
  • Harmonic Gear Available
Direct Connect Stepper Motor
Unit of Measure
Items Stepper Motor
AZM24AKW-HS50
1.10 in. (28 mm) Direct Connect Stepper Motor with Harmonic Gear (50:1)
Web Price Request Quote
 Stepper Motor
AZM24AKW-HS100
1.10 in. (28 mm) Direct Connect Stepper Motor with Harmonic Gear (100:1)
Web Price Request Quote
 Direct Connect Stepper Motor
AZM24AKW
1.10 in. (28 mm) Direct Connect Stepper Motor
Web Price Request Quote
 Direct Connect Stepper Motor
AZM26AKW
1.10 in. (28 mm) Direct Connect Stepper Motor
Web Price Request Quote
Frame Size - 1.18 in - 1.18 in - 1.1 in - 1.1 in
Motor Length - 3.11 in. - 3.11 in. - 2.15 in. - 2.91 in.
Driver Voltage Input Power - DC
Speed-Torque Characteristics -
 
 		-
 
 		-
 
 		-
 
Holding Torque - 250 oz-in - 340 oz-in - 13.5 oz-in - 26.9 oz-in
Shaft/Gear Type - Harmonic Gear - Harmonic Gear - Round Shaft with Flat (No Gearhead) - Round Shaft with Flat (No Gearhead)
Gear Ratio (X:1) - 50 :1 - 100 :1 - -
Backlash -
Lost Motion - 1.5 max - 1.5 max - -
Shaft - Single
Electromagnetic Brake - Not Equipped
Cable Direction -
Permissible Speed Range (r/min) - 0 ~ 70 - 0 ~ 35 - -
Rotor Inertia - 0.066 oz-in² - 0.066 oz-in² - 0.05 oz-in² - 0.093 oz-in²
RoHS Compliant - These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards - CE
Permissible Overhung Load - 0 in. from Shaft End = 22 lb0.2 in. from Shaft End = 30 lb0.39 in. from Shaft End = 39 lb0.59 in. from Shaft End = 56 lb - 0 in. from Shaft End = 22 lb0.2 in. from Shaft End = 30 lb0.39 in. from Shaft End = 39 lb0.59 in. from Shaft End = 56 lb - -
Permissible Thrust Load - 31 lb - 31 lb - -
Permissible Thrust Load -