ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
| Items |
 BLHM5100KC-A / BLHD100K 100 W (1/8 HP) Brushless DC Motor Speed Control System (24 VDC) Web Price $448.00
|
 BLHM5100KC-GFS / GFS5G5 / BLHD100K 100 W (1/8 HP) Brushless DC Motor Speed Control System (5:1 Gear Ratio) (24 VDC) Web Price $635.00
|
BLHM5100KC-GFS / GFS5G10 / BLHD100K 100 W (1/8 HP) Brushless DC Motor Speed Control System (10:1 Gear Ratio) (24 VDC) Web Price $635.00
|
BLHM5100KC-GFS / GFS5G15 / BLHD100K 100 W (1/8 HP) Brushless DC Motor Speed Control System (15:1 Gear Ratio) (24 VDC) Web Price $635.00
|
BLHM5100KC-GFS / GFS5G20 / BLHD100K 100 W (1/8 HP) Brushless DC Motor Speed Control System (20:1 Gear Ratio) (24 VDC) Web Price $635.00
|
|||||
| Motor Frame Size | 3.54 in. | |||||||||
| Output Power | 100 W (1/8 HP) | |||||||||
| Power Supply | 24 VDC | |||||||||
| Driver Type | Analog | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 5 :1 | 10 :1 | 15 :1 | 20 :1 | ||||||
| Output Shaft Diameter | 12 mm | 18 mm | 18 mm | 18 mm | 18 mm | |||||
| Degree of Protection (Motor) | IP65 | |||||||||
| Rated Torque | 3.5 lb-in | 15.9 lb-in | 31 lb-in | 47 lb-in | 63 lb-in | |||||
| Variable Speed Range (r/min) | 100 ~ 3000 | 20 ~ 600 | 10 ~ 300 | 6.7 ~ 200 | 5 ~ 150 | |||||
| Permissible Load Inertia | 31 oz-in² | 250 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 137 oz-in² | 1040 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 550 oz-in² | 2300 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 1230 oz-in² | 3800 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 2200 oz-in² | |||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 36 lb0.79 in. from Shaft End = 38 lb | 0.39 in. from Shaft End = 67 lb0.79 in. from Shaft End = 90 lb | 0.39 in. from Shaft End = 90 lb0.79 in. from Shaft End = 112 lb | 0.39 in. from Shaft End = 90 lb0.79 in. from Shaft End = 112 lb | 0.39 in. from Shaft End = 90 lb0.79 in. from Shaft End = 112 lb | |||||
| Permissible Thrust Load | 33 lb | 33 lb | 33 lb | 33 lb | ||||||
| Permissible Thrust Load | The permissible thrust load should not be greater than half the motor mass. | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Speed Control Method (Select one of the following) | Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
| Number of Speed Settings | 2-speed operation is possible | |||||||||
| Multi-Speed Setting Method |
External speed potentiometer or external DC voltage: 0 to 5 VDC, 1 mA min VR1 |
|||||||||
| Max. Extension Length (m) | 2 | |||||||||
| RoHS Compliant | Yes | |||||||||
| I/O Functions |
Direct Input Method: C-MOS Negative Logic Input Point: 5 Points Initial Assignment: START/STOP, RUN/BRAKE, CW/CCW, INT.VR/EX, ALARM-RESET Direct Output Method: Transistor and open-collector output Point: 2 Points Initial Assignment: SPEED, ALARM |
|||||||||
|
|
||||||||||
