Item # AZ66ACD-PS10-3, AlphaStep Battery-Free, Mechanical Absolute Encoder Stepper Motor and Driver Package with Built-in Controller On Oriental Motor USA

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

αSTEP Stepper Motors Brushless DC Motors Servo Motors AC Gear Motors Linear Actuators Rotary Actuators Network Products Cooling Fans

All Categories - Shop Online > Legacy / Discontinued Products > Packages > Stepper Motor / Driver Packages > AZ Series Absolute Sensor Stepper Motor and Driver Package with Built-in Controller (AC Input) > Item # AZ66ACD-PS10-3

Request Information

Web Price

Request Quote

This package part number has been discontinued. We are now offering these as component products.
Please contact your local sales office for updated part numbers.

Unit of Measure

Product Line	- Oriental Motor®
Frame Size	- 2.36 in60 mm
Motor Length	- 4.09 in.104 mm
Speed-Torque Characteristics	- Loading zoom Speed - Torque Characteristics
Holding Torque	- 708 oz-in5 N·m
Type	- Absolute Sensor Type
Shaft/Gear Type	- Planetary Gear
Gear Ratio (X:1)	- 10 :1
Backlash	- 25 arcmin (0.72º)
Feedback Device (Motor)	- Mechanical Absolute Encoder
Shaft	- Single
Electromagnetic Brake	- Not Equipped
Power Supply	- Single-Phase/Three-Phase 200-240 VAC
Current	- 1.4 A [Three-Phase] 2.3 A [Single-Phase]
Control Power Supply	- 24 VDC ± 5%, 0.25 A
Resolution (Resolution Setting: 1000 P/R)	- 0.036 °/Pulse
Permissible Speed Range (r/min)	- 0 ~ 300
Rotor Inertia	- 2 oz-in²370x10^-7 kg·m²
Stop Position Accuracy	- ±5 arc minutes (±0.084º)
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.
Radial Load	- 0 in. from Shaft End = 56 lb0.2 in. from Shaft End = 60 lb0.39 in. from Shaft End = 67 lb0.59 in. from Shaft End = 76 lb0.79 in. from Shaft End = 87 lb0 mm from Shaft End = 250 N5 mm from Shaft End = 270 N10 mm from Shaft End = 300 N15 mm from Shaft End = 340 N20 mm from Shaft End = 390 N
Axial Load	- 22 lb100 N
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL CE
CE Marking	- Low Voltage Directives EMC Directives
Power Removal Function	- Emergency Torque Off (ETO) Function
Components	- AZM66AC-PS10 [Motor] AZD-CD [Driver]
Degree of Protection	- [Motor] IP66 (excluding the mounting surface and connector) [Driver] IP10

Direct Input	- Input Points: 6 Points
Direct Output	- Output Points: 6 Points

Network Input	- 16 Points
Network Output	- 16 Points
Protocol	- Modbus RTU Mode
Electrical Characteristics	- EIA-485 Baed, Straight Cable Use twisted-pair cables (TIA/EIA-568B CAT5e or greater recommended) the maximum total extension length is 50 m.
Transmission/Reception Mode	- Half-duplex communication and Start-stop synchronization (data: 8 bits, stop bit: 1 bit or 2 bits, parity: none, even, or odd)
Baud Rate	- Select from 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, or 230400 bps
Connection Type	- Up to 31 units can be connected to a single programmable controller (master unit).

Product Line

Frame Size

Motor Length

Speed-Torque Characteristics

Holding Torque

Type

Shaft/Gear Type

Gear Ratio (X:1)

Backlash

Feedback Device (Motor)

Shaft

Electromagnetic Brake

Power Supply

Current

Control Power Supply

Resolution (Resolution Setting: 1000 P/R)

Permissible Speed Range (r/min)

Rotor Inertia

Stop Position Accuracy

Shaft Runout

Concentricity

Perpendicularity

Radial Load

Axial Load

RoHS Compliant

Safety Standards

CE Marking

Power Removal Function

Components

Degree of Protection

ABOUT ORIENTAL MOTOR

PRODUCT INFO

SUPPORT

NEWS

WEB