T-MDA1451-24-G 5.51 in. (140 mm) Axial Fan Kit

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

Request Information

This item has been discontinued. Please contact our technical support team for a replacement.

Unit of Measure

Fan Type	- Axial Flow
Frame Size	- 5.51 in140 mm
Thickness	- 2.01 in.51 mm
Power Supply	- 24 VDC
Current	- 0.70
Function	- Low Speed Alarm - Electronic
Connection Type	- Lead Wire
Speed (r/min)	- 3150
Max. Air Flow	- 205 CFM 5.8 m³/min
Max. Static Pressure	- 0.521 inH₂O 130 Pa
Noise Level	- 49 db (A)
Components	- MDA1451-24 (Fan Unit) FG14D (Finger Guard) M4 x 70mm (Mounting Screws)
Fan Kit	- Fan, Finger Guard, Connection Cable, Mounting Screws
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL CE
CE Marking	- EMC Directives
Insulation Resistance	- 10 MΩ or more when 500 VDC is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 500V at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.
Temperature Rise	- 27ºF (15ºC) or less measured by the thermometer method after the temperature of the case has stabilized after continuous operation under normal ambient temperature and humidity.
Thermal Class	- UL/CSA Standards: 105 (A), EN Standards: 120 (E)
Overheat Protection	- Built-in Overheat Protection Circuit
Ambient Temperature Range	- 14ºF ~ 140ºF (-10ºC ~ 60ºC)
Ambient Humidity	- 85% or less (noncondensing)

Alarm Type	- Electronic
Alarm Activation Speed	- 1800 ± 400 r/min
Output Mode	- Open-collector output
Output Condition	- Normal operation: L level (Internal transistor ON) Alarm output: H level (Internal transistor OFF)
Maximum Rating	- Maximum Applied Voltage: 30 VDC max. Maximum Inflow Current: 15 mA max.
Delay Function	- Built-In Starting Delay Time: 10 sec. max. (The alarm function starts monitoring within 10 sec. after the power is turned on.)
Circuit Connection	- Circuit Connection

Fan Type