 
        | Lead Time1 | - {Contact your local sales office for more information.} | 
| Product Line | - Oriental Motor® | 
| Motor Type | - Electromagnetic Brake - Induction | 
| Frame Size | - 3.54 in90 mm | 
| Output Power | - 60 W (1/12 HP) | 
| Voltage (VAC) | - Three-Phase 220/230 VAC | 
| Frequency (Hz) | - 60 50 | 
| Current | -
                                                                                        0.37 A [220 VAC, 50 Hz] 0.38 A [230 VAC, 50 Hz] 0.33 A [60 Hz] | 
| Type | - Cable | 
| Electromagnetic Brake | - Equipped | 
| Shaft/Gear Type | - Parallel Shaft Gearhead | 
| Gear Ratio (X:1) | - 25 :1 | 
| Output Shaft Diameter | - 3/4 in. | 
| Rated Torque | - 66 lb-in [60 Hz] 77 lb-in [50 Hz] 8 N·m [60 Hz] 9 N·m [50 Hz] | 
| Rated Speed (rpm) | - 60 [50 Hz] 72 [60 Hz] | 
| Permissible Load Inertia | - 3750 oz-in²687.5 x 10-4 kg·m² | 
| Permissible Overhung Load | - 0.39 in. from Shaft End = 112 lb0.79 in. from Shaft End = 157 lb10 mm from Shaft End = 500 N20 mm from Shaft End = 700 N | 
| Permissible Thrust Load | - 33 lb150 N | 
| RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | 
| Safety Standards | - UL CCC CE | 
| CE Marking | - Low Voltage Directives | 
| Insulation Resistance | - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. | 
| Dielectric Strength | - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. | 
| Temperature Rise | - A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after | 
| Thermal Class | - 130 (B) | 
| Ambient Temperature Range | - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) | 
| Ambient Humidity | - 85% or less (noncondensing) | 
| Degree of Protection | - IP40 | 
| Voltage (Brake) | - Single-Phase 220/230 | 
| Current (Brake) | - 0.04 A | 
| Input | - 6 W | 
| Static Friction Torque | - 71 oz-in0.5 N·m | 
| 
                                                                             | 
| 
                                                                             | 
 
    
