AZM24AK-HS50, 1.10 in. (28 mm) AZ Series Harmonic Gear Stepper Motor with Absolute Mechanical Encoder (Gear Ratio: 50:1) (DC Input)

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

αSTEP Stepper Motors Brushless DC Motors Servo Motors AC Gear Motors Linear Actuators Rotary Actuators Network Products Cooling Fans

Request Information

Web Price

$1,043.00

The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.

Requires αSTEP AZ Series Driver

*Connection Cables required (sold separately)

Compatible Motors

Unit of Measure

Lead Time¹
Product Line	- Oriental Motor®
Frame Size	- 1.18 in30 mm
Motor Length	- 3.11 in.79 mm
Driver Voltage Input Power	- DC
Speed-Torque Characteristics	- Loading zoom
Holding Torque	- 250 oz-in1.8 N·m
Holding Torque at Motor Standstill	- 255 oz-in1.8 N·m
Type	- Absolute Mechanical Encoder
Shaft/Gear Type	- Harmonic Gear
Gear Ratio (X:1)	- 50 :1
Lost Motion	- 1.5 arc min (max.)
Shaft	- Single
Electromagnetic Brake	- Not Equipped
Connection Type	- Cable
Resolution (Resolution Setting: 1000 P/R)	- 0.0072 °/Pulse
Rotor Inertia	- 0.066 oz-in²12x10^-7 kg·m²
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- CE
CE Marking	- Low Voltage Directives EMC Directives
Insulation Class	- Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.]
Insulation Resistance	- 100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings
Dielectric Strength	- Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 0.5 kVAC 50 Hz or 60 Hz
Ambient Temperature	- 0 ~ 40ºC (32 ~ 104ºF) (non-freezing)
Ambient Humidity	- 85% or less (Non-Condensing)
Degree of Protection	- IP40 (excluding the mounting surface and connector)
Stop Position Accuracy	- ±5 arc minutes (±0.083º)
Shaft Runout	- 0.05 mm (0.002 in.) T.I.R.
Concentricity	- 0.075 mm (0.003 in.) T.I.R.
Perpendicularity	- 0.075 mm (0.003 in.) T.I.R.
Permissible Overhung Load	- 0 in. from Shaft End = 22 lb0.2 in. from Shaft End = 30 lb0.39 in. from Shaft End = 39 lb0.59 in. from Shaft End = 56 lb0 mm from Shaft End = 100 N5 mm from Shaft End = 135 N10 mm from Shaft End = 175 N15 mm from Shaft End = 250 N
Permissible Axial Load	- 31 lb140 N