T-MBD12-24A-GA 4.72 in. (120 mm) Centrifugal Fan Kit

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

Request Information

This item is scheduled to be discontinued. Please contact our technical support team for a replacement.

Fan Kits

Unit of Measure

Specifications | Alarm Specifications

Return Policy	- This item is scheduled to be discontinued. Please contact our technical support team for a replacement.
Fan Type	- Centrifugal Blower
Impeller Diameter	- 4.72 in.120 mm
Power Supply	- 24 VDC
Current (A)	- 1.50
Speed (r/min)	- 1900
Max. Air Flow	- 106 CFM 3 m³/min
Max. Static Pressure	- 1.49 inH₂O 372 Pa
Noise Level	- 58 dB (A)
RoHS Compliant	- Yes
Insulation Resistance	- 10 MΩ or more when 500 VDC is applied between the windings and the frame under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 500 V at 50Hz applied between the windings and the frame for 1 minute under normal ambient temperature and humidity.
Temperature Rise	- 27ºF (15ºC) or less measured by the thermometer method after the temperature of the motor case has stabilized after continuous operation under normal ambient temperature and humidity.
Insulation Class	- Class E (248ºF [120ºC])
Overheat Protection	- Built-in Overheat Protection Circuit
Ambient Temperature Range	- 14ºF ~ 140ºF (-10ºC ~ 60ºC)
Ambient Humidity	- 85% or less (noncondensing)

Alarm Type	- Contact
Alarm Activation Speed	- 1500 ± 400 r/min
Output Mode	- Relay output
Output Condition	- Normal operation: Contact ON Alarm output: Contact OFF
Maximum Rating	- Maximum applied voltage: 30 VDC max. Maximum current: 30 mA max.
Delay Function	- Built-in starting delay time: 10 sec. max. (The alarm function starts monitoring within 10 seconds after the power is turned on.)
Circuit Connection	- Loading zoom Circuit Connection

Return Policy