| Product Line | - VEXTA® | 
| Motor Type | - Brushless DC Motor | 
| Motor Frame Size | - 3.15 in. sq. | 
| Output Power | - 25 W (1/30 HP) | 
| Power Supply | - Three-Phase 200-230 VAC | 
| Shaft/Gear Type | - Round Shaft (No Gearhead) | 
| Variable Speed Range (r/min) | - 100 ~ 2000 | 
| Rated Torque (lb-in) | - 1.1 | 
| Permissible Load Inertia | - 9.80 oz-in2 | 
| Components | - AXUM425-A (Motor) AXUD25S (Control Unit) | 
| RoHS Compliant | - No | 
| Safety Standards | - UL CSA EN CE | 
| CE Marking | - Low Voltage Directives EMC Directives | 
| Acceleration/Deceleration Time | - 0.5 ~ 10 sec. (at 2000 r/min with no load) set by a potentiometer. | 
| Control System | - Speed potentiometer on front panel. | 
| Insulation Class | - Class E (248ºF [120ºC]) | 
| Insulation Resistance | - [Motor] 100 MΩ or more when 500 VDC is applied between the windings and the frame. [Control Unit] 100 MΩ or more when 500 VDC is applied between the power supply input terminal and the ground terminal, and between the power supply input terminal and the I/O terminal. | 
| Dielectric Strength | - [Motor] Sufficient to withstand 1500 VAC at 50 Hz applied between the windings and the frame. [Control Unit] Sufficient to withstand 1.8 kVAC at 50 Hz applied between the ground terminal and the power supply input terminal for 1 minute, and 3 kVAC at 50 Hz applied between the ground terminal and the I/O terminal for 1 minute. | 
| Ambient Temperature Range | - [Motor] 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing [Control Unit] 32ºF ~ 104ºF (0ºC ~ 40ºC), nonfreezing | 
| Ambient Humidity | - 85% maximum (noncondensing) | 
| Operating Atmosphere | - No corrosive gases or dust | 
| Degree of Protection | - [Motor] IP65 (except for mounting surface) [Control Unit] IP10 | 
| Speed Control Method (Select one of the following) | - Panel mounted potentiometer | 
| Number of Speed Settings | - 1 | 
| Instantaneous Stop | - Yes | 
| Multi-Axes Control | - No | 
| Alarm Output | - Yes | 
| Position Control Mode | - No | 
| Torque Limit Control | - No | 
| Vertical Drive (Gravitational Operation) | - No | 
| Max. Extension Length (m) | - 10.50 | 
 
    
