Product Line |
- Oriental Motor® |
Motor Frame Size |
- 4.09 in.104 mm |
Rated Output Power |
- 750 W (1 HP) |
Speed-Torque Characteristics |
-
 Graph |
Rated Torque |
- 6780 oz-in47.80 N·m |
Permissible Speed Range |
- 0 ~ 120 r/min |
Max Instantaneous Torque |
- 20300 oz-in143 N·m |
Rotor Inertia |
- 5.6 oz-in²1.02x10-4 kg·m² |
Resolution (P/R) |
- 100 to 100000 (Factory setting 1000) |
Detector |
-
Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits |
Gear Type - Search |
- Planetary Gear |
Gear Ratio (X:1) |
- 25 :1 |
Electromagnetic Brake |
- Equipped |
Brake Type |
- Power Off Activated Type |
Brake Power Supply |
- 24 VDC ±10% |
Power Consumption |
- 8.5 W |
Excitation Current |
- 0.35 A |
Static Friction Torque |
- 6780 oz-in47.8 N·m |
Backlash |
- 12 arc min |
Permissible Overhung Load |
- 0 in. from Shaft End = 300 lb0.2 in. from Shaft End = 310 lb0.39 in. from Shaft End = 330 lb0.59 in. from Shaft End = 340 lb0.79 in. from Shaft End = 360 lb0.98 in. from Shaft End = 370 lb1.18 in. from Shaft End = 390 lb1.38 in. from Shaft End = 410 lb0 mm from Shaft End = 1350 N5 mm from Shaft End = 1400 N10 mm from Shaft End = 1480 N15 mm from Shaft End = 1550 N20 mm from Shaft End = 1600 N25 mm from Shaft End = 1650 N30 mm from Shaft End = 1750 N35 mm from Shaft End = 1850 N |
Permissible Thrust Load |
- 220 lb1000 N |
Thermal Class |
- 130 (B) |
Insulation Resistance (Motor) |
-
100 MΩ min. when measured with a 500 VDC megger between the following locations: Case - Motor Windings Case - Electromagnetic Brake Windings |
Dielectric Voltage (Motor) |
-
No abnormality is judged with the following application for 1 minute: Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz |
Ambient Temperature (Motor) |
- 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
- 85% max. (non-condensing) |
Operating Atmosphere |
- No corrosive gases. Must not be exposed to oil or other liquids. |
Degree of Protection |
- IP65 (excluding installation surface and connector locations.) |
Shaft Runout |
- 0.05 T.I.R. (mm) |
Concentricity |
- 0.075 T.I.R. (mm) |
Perpendicularity |
- 0.075 T.I.R. (mm) |
Safety Standards |
-
CE UL/CSA |
|
|
|
|
