Product Line |
- Oriental Motor® |
Motor Frame Size |
- 4.09 in.104 mm |
Rated Output Power |
- 750 W (1 HP) |
Speed-Torque Characteristics |
-
 Graph |
Rated Torque |
- 2710 oz-in169 N·m |
Permissible Speed Range |
- 0 ~ 300 r/min |
Max Instantaneous Torque |
- 8130 oz-in57.3 N·m |
Rotor Inertia |
- 5.6 oz-in²1.02x10-4 kg·m² |
Resolution (P/R) |
- 100 to 100000 (Factory setting 1000) |
Detector |
-
Absolute Encoder 1 rotation 20 bits, multiple rotations 16 bits |
Gear Type - Search |
- Planetary Gear |
Gear Ratio (X:1) |
- 10 :1 |
Electromagnetic Brake |
- Equipped |
Brake Type |
- Power Off Activated Type |
Brake Power Supply |
- 24 VDC ±10% |
Power Consumption |
- 8.5 W |
Excitation Current |
- 0.35 A |
Static Friction Torque |
- 2710 oz-in19.1 N·m |
Backlash |
- 12 arc min |
Permissible Overhung Load |
- 0 in. from Shaft End = 200 lb0.2 in. from Shaft End = 210 lb0.39 in. from Shaft End = 220 lb0.59 in. from Shaft End = 230 lb0.79 in. from Shaft End = 240 lb0.98 in. from Shaft End = 260 lb1.18 in. from Shaft End = 270 lb1.38 in. from Shaft End = 290 lb0 mm from Shaft End = 900 N5 mm from Shaft End = 950 N10 mm from Shaft End = 1000 N15 mm from Shaft End = 1050 N20 mm from Shaft End = 1100 N25 mm from Shaft End = 1180 N30 mm from Shaft End = 1230 N35 mm from Shaft End = 1300 N |
Permissible Thrust Load |
- 146 lb650 N |
Thermal Class |
- 130 (B) |
Insulation Resistance (Motor) |
-
100 MΩ min. when measured with a 500 VDC megger between the following locations: Case - Motor Windings Case - Electromagnetic Brake Windings |
Dielectric Voltage (Motor) |
-
No abnormality is judged with the following application for 1 minute: Case - Motor Windings 1.5 kVAC 50 Hz or 60 Hz Case - Electromagnetic Brake Windings 1.0 kVAC 50 Hz or 60 Hz |
Ambient Temperature (Motor) |
- 0 ~ +40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
- 85% max. (non-condensing) |
Operating Atmosphere |
- No corrosive gases. Must not be exposed to oil or other liquids. |
Degree of Protection |
- IP65 (excluding installation surface and connector locations.) |
Shaft Runout |
- 0.05 T.I.R. (mm) |
Concentricity |
- 0.075 T.I.R. (mm) |
Perpendicularity |
- 0.075 T.I.R. (mm) |
Safety Standards |
-
CE UL/CSA |
|
|
|
|
