RE2HR3M, Hollow Shaft Incremental Rotary Encoder (Voltage Output

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

Request Information

Stand alone Encoder, is small, thin, and lightweight high-resolution incremental encoder can be installed in tight spaces.

Unit of Measure

Lead Time¹
Output Shaft Type	- Hollow Shaft
Resolution (P/R)	- 2000 (P/R)
Output Type	- Incremental
Output	- Voltage
Output Signals	- A phase, B phase, Z phase: 3 channel
Output Circuit	-
Max. Draw Current	- 20 mA
Output Voltage (High)	- 4.3 VDC min. (no load)
Output Voltage (Low)	- 0.5 VDC max.
Response Frequency (kHz)	- 100 kHz max.
Power Supply	- 5 VDC ± 10%
Current Consumption	- 45 mA max.
Angular Accuracy	- ±0.36˚
Vibration	- 10~55 Hz Full amplitude 1.5 mm X, Y, Z; 2 hours for each direction
Shock	- 490 m/s² 11 ms X, Y, Z directions; 3 times each
Inertia	- 1.6×10⁻⁷ kg·m²0.009 oz-in²
Permissible Radial Load	- 2.25 lb10 N
Permissible Axial Load	- 1.12 lb5 N
Max Speed (rpm)	- 6000 r/min (Max. Response Frequency)
Mass	- 38 g1.34 oz
Ambient Humidity	- 85% or less (Non-Condensing)
Altitude	- Up to 1000 m above sea level
Degree of Protection	- IP20
Operating Atmosphere	- No corrosive gases or dust.The product should not be exposed to water, oil or other liquids.
Insulation Resistance	- 100 MΩ or more when a 500 VDC megger is applied between the power supply terminal and the frame.
Dielectric Strength	- Sufficient to withstand 0.5 kVAC 50/60 Hz applied between the power supply terminal and the frame for 1 minute.

¹ Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

Output Shaft Type