T-MDE1451-48L2G 5.51 in. (140 mm) Axial Fan Kit

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

Request Information

This item has been discontinued. Please contact our technical support team for a replacement.

Unit of Measure

Fan Type	- Axial Flow
Frame Size	- 5.51 in140 mm
Thickness	- 2.01 in.53 mm
Function	- Stall Alarm - Electronic
Power Supply	- 48 VDC
Connection Type	- Lead Wire
Current (A)	- 0.35
Type	- E Type (Long Life)
Speed (r/min)	- 3150
Max. Air Flow	- 205 CFM 5.8 m³/min
Max. Static Pressure	- 0.521 inH₂O 130 Pa
Noise Level	- 49 db (A)
Components	- MDE1451-48L2 (Fan Unit) FG14D (Finger Guard) M4 x 70mm (2.76 in.) (Mounting Screws)
Fan Kit	- Fan, Finger Guard, Mounting Screws
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL CE
CE Marking	- EMC Directives
Insulation Resistance	- 10 MΩ or more when 250 VDC is applied between the windings and the frame under normal ambient temperature and humidity.
Dielectric Strength	- Sufficient to withstand 500V at 50Hz applied between the windings and the frame for 1 minute under normal ambient temperature and humidity.
Temperature Rise	- 18ºF (10ºC) or less measured by the thermometer method after the temperature of the case has stabilized after continuous operation under normal ambient temperature and humidity.
Insulation Class	- Class E (248ºF [120ºC]), Recognized as Class A (221ºF [105ºC]) by UL and CSA standards.
Overheat Protection	- Built-in Overheat Protection Circuit
Ambient Temperature Range	- 14ºF ~ 140ºF (-10ºC ~ 60ºC)
Ambient Humidity	- 85% or less (noncondensing)

Alarm Type	- Electronic
Alarm Activation Speed	- When locked
Output Mode	- Open-collector output
Output Condition	- Operation: L level (Internal transistor ON) When locked: H level (Internal transistor OFF)
Maximum Rating	- Maximum applied voltage: 30 VDC max. Maximum current: 5 mA max.
Delay Function	- Not built-in: External delay circuit is required to prevent alarm detection when starting the fan. The delay time should be at least 1 second.
Circuit Connection	- Circuit Connection

Fan Type