AZM69A0C / PLE60-40A / P00025, 2.36 in. (60 mm) AZ Series Planetary Gear Stepper Motor with Absolute Mechanical Encoder (Gear Ratio: 40:1) (AC Input)

The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.

Requires αSTEP AZ Series Driver
Motor and Gearhead ship separately and must be assembled using the included gasket and screws

*Connection Cables required (sold separately)

Compatible Motors

Unit of Measure

Specifications

Lead Time¹	- {Contact your local sales office for more information.}
Product Line	- Oriental Motor®
Frame Size	- 2.36 in
Motor Length	- 7.2 in.
Driver Voltage Input Power	- AC
Speed-Torque Characteristics	- Speed - Torque Characteristics
Holding Torque	- 5664.5 oz-in
Holding Torque at Motor Standstill	- 5664 oz-in
Type	- Absolute Mechanical Encoder
Shaft/Gear Type	- Planetary Gear
Gear Ratio (X:1)	- 40 :1
Backlash	- 12 arc min (0.2°)
Shaft	- Single
Electromagnetic Brake	- Not Equipped
Connection Type	- Cable
Resolution (Resolution Setting: 1000 P/R)	- 0.009 °/Pulse
Permissible Speed Range (r/min)	- 0 ~ 112.5
RoHS Compliant	- These products do not contain substances that exceed the regulation values in the RoHS Directive.
Safety Standards	- UL CSA CE
CE Marking	- Low Voltage Directives EMC Directives
Insulation Class	- Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.]
Insulation Resistance	- 100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings
Dielectric Strength	- Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz
Ambient Temperature	- 0 ~ 40ºC (32 ~ 104ºF) (non-freezing)
Ambient Humidity	- 85% or less (Non-Condensing)
Degree of Protection	- Motor: IP66 (excluding the mounting surface and connector) Gearhead: IP54
Stop Position Accuracy	- ±3 arc minutes (±0.05º)
Permissible Overhung Load	- Static load, center of output shaft: 157.37 lb
Permissible Axial Load	- 179 lb