AR Series Closed Loop Stepper Motors with Built-in Controller (Stored Data) (DC Input)

There is a scheduled quotes/orders outage today, from 3:00 AM to 8:00 AM US Eastern Time. Thank you for your understanding.

Product Information Solutions Technical Information Motor Sizing Downloads Virtual Showroom Contact Us

αSTEP Stepper Motors Brushless DC Motors Servo Motors AC Gear Motors Linear Actuators Rotary Actuators Network Products Cooling Fans

The AR Series substantially reduces heat generation from the motor allowing for continuous operation. In addition to implementing the closed loop control based on Oriental Motor's original Alpha Step technology, with the AR Series there is no gain tuning or hunting problems. Based on stepping motor technology the AR Series can perform quick positioning operations over a short distance while providing smooth performance and consumes up to 40% less power than conventional models. With the additional software or control module, easy changes to parameters, additional functions and various monitoring operations can be achieved. The Built-in Controller reduces the burden on the programmable PLC because the information necessary for motor operation is built into the driver. This simplifies the system configuration for multi-axis control.

Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
Continuous duty / low heat
No hunting or gain tuning
Closed loop
Improved angle accuracy
Energy saving
Geared options
Electromagnetic Brake option
Resolution - 0.72º, 0.36º, 0.072º or 0.036º (Microstep)
24/48 VDC Power supply input
AC input versions available
RoHS compliant

Request Information Search by Specification

Unit of Measure

Items	AR24SAKD-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote	AR24SBKD-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote	AR26SAKD-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote	AR26SBKD-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote	AR24SAKD-T7.2-3 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller (Stored Data) Web Price Request Quote
Frame Size	- 1.1 in28 mm
Motor Length	- 1.77 in.45 mm	- 1.77 in.45 mm	- 2.56 in.65 mm	- 2.56 in.65 mm	- 2.78 in.70.5 mm
Speed-Torque Characteristics	- Speed - Torque Characteristics	- Speed - Torque Characteristics	- Speed - Torque Characteristics	- Speed - Torque Characteristics	- Speed - Torque Characteristics
Holding Torque	- 7.8 oz-in0.055 N·m	- 7.8 oz-in0.055 N·m	- 17 oz-in0.12 N·m	- 17 oz-in0.12 N·m	- 28 oz-in0.2 N·m
Shaft/Gear Type	- Round Shaft (No Gearhead)	- Round Shaft (No Gearhead)	- Round Shaft (No Gearhead)	- Round Shaft (No Gearhead)	- Taper Hobbed Gear
Gear Ratio (X:1)	-	-	-	-	- 7.2 :1
Backlash	-	-	-	-	- 60 arc min (1°)
Electromagnetic Brake	- Not Equipped
Static Friction Torque	-
Shaft	- Single	- Double	- Single	- Double	- Single
Power Supply	- 24 VDC
Permissible Speed Range (r/min)	-	-	-	-	- 0 ~ 416
Rotor Inertia	- 0.06 oz-in²11x10^-7 kg·m²	- 0.06 oz-in²11x10^-7 kg·m²	- 0.109 oz-in²20x10^-7 kg·m²	- 0.109 oz-in²20x10^-7 kg·m²	- 0.06 oz-in²11x10^-7 kg·m²
Lost Motion	-
Radial Load	- 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N	- 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N	- 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N	- 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb0 mm from Shaft End = 25 N5 mm from Shaft End = 34 N10 mm from Shaft End = 52 N	- 0 in. from Shaft End = 3.3 lb0.2 in. from Shaft End = 3.8 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 5.1 lb0 mm from Shaft End = 15 N5 mm from Shaft End = 17 N10 mm from Shaft End = 20 N15 mm from Shaft End = 23 N
Axial Load	- 1.1 lb5 N	- 1.1 lb5 N	- 1.1 lb5 N	- 1.1 lb5 N	- 2.2 lb10 N
Driver Type	- Built-in Controller (Stored Data Type)
UPC Code	-

ABOUT ORIENTAL MOTOR

PRODUCT INFO

SUPPORT

NEWS

WEB